Author：DavisDate：2024-5-8
Precautions for using automatic car washing machine
1. Car settings: When entering the automatic car wash, first set the car to neutral. Do not use the handbrake or foot brake. After entering the automatic car wash, do not move the steering wheel arbitrarily or perform any operations on the vehicle, otherwise the car wash outside the car will affect the car.
2. Check whether all power supplies and air pumps are turned on, and check whether there is enough water in the water tank. Check whether the car is parked properly. Check that the reflector and wires are retracted.
3. There is a special detergent for car washing that can clean the car well without damaging the car surface. If you use washing powder, washing powder and other unqualified detergents, these alkaline detergents will wash away the grease in the paint during cleaning, causing the paint surface to age. So be sure to pay attention when cleaning.
1. Do not turn off the engine when washing the automatic car. The following are things to note about automatic car washes: Car settings: When entering an automatic car wash, you must first set the car to neutral. Do not use the handbrake or foot brake. It should be in neutral and N. Automatic car washing relies on a conveyor belt to bring the car into the car wash room for washing. When the car enters the car wash room and is washed, the directional wheels will move with the movement of the conveyor belt. Tip: Car washing is not just a physical job, you also need to pay attention to the method.
2. There is no need to turn off the engine. When the car is automatically cleaned, it should be in the empty and N positions. It is best not to shut down the engine. The car is now under the intelligent control of the computer and can only operate normally if the engine does not stall. Automatic car washing is to enter the car wash workshop through the conveyor belt to wash the car.
↓Next [ Qingming Festival Holiday Notice ]
